Fast, Reliable Attic Insulation Across Hurst
Attic insulation in Hurst typically costs $1,800 to $4,200 for a full removal-and-reinstall on a mid-century ranch, and $1,200 to $2,800 for a top-up or air-sealing-plus-blow-in job. Most Hurst homes from the 1960s and 1970s still carry original R-19 batt insulation that has settled to half its rated value, which means rooms over the garage and west-facing bedrooms run noticeably hotter every July. Our crews know the Bellaire Drive and Precinct Line Road neighborhoods well because we’ve been in those attics. Call (682) 233-8300 and a live person answers, 24/7.
Why Thistledown Insulation Fort Worth Is Hurst’s Preferred Attic Insulation Company
We’re a Cedarwell-family company, founded in 2003, which means the Attic Insulation team you hire reports to the same care standards as every Cedarwell property. Neil Barron leads our crew, and he’s built a reputation around one thing: explaining exactly what’s going into your attic, what it costs, and what we’ll leave behind when we go. No vague ranges. No surprises on the invoice. The 365-Day Done Right Promise sits behind every Hurst job: if it’s not right, we make it right, no debate.
Hurst homeowners tell us the same things, job after job. They want clean floors when a crew is walking from the front door to the attic hatch. They want to know the product going in near the nursery is safe. They want a written price before anyone touches a rafter. That’s what we do. Shoe covers and drop cloths on every visit, a photo of the clean-up before the van leaves, and background-checked, uniformed technicians who introduce themselves at the door.
Radiant Barrier in Hurst
Radiant Barrier in Hurst is one of the highest-impact upgrades for dark shingle roofs, and we install it weekly on the ranch and split-level homes that dominate the city’s housing stock. In July, a dark shingle roof over a Hurst attic can push temperatures past 140°F. A radiant barrier stapled to the rafters reflects a large share of that heat before it ever reaches your insulation, which means the insulation below can actually do its job instead of getting baked from above. Most Hurst homeowners see the biggest benefit in rooms facing west, where the afternoon sun hits hardest.
One-Trip Install for Mid-Century Homes
We’ve done enough Bellaire Drive attics to know the rhythm: the original R-19 is matted and compressed, the top plates were never air-sealed, and the roof deck is hot enough to cook on. A radiant barrier install pairs naturally with an air-sealing and blow-in insulation job because we’re already in the attic with the hose and the staple gun. One trip, the whole problem addressed.
What It Costs
A radiant barrier install for a typical 1,500 to 2,200 square-foot Hurst home runs $900 to $1,800, depending on roof pitch and attic accessibility. You’ll have the written number before we start.
Attic Cleaning Services in Hurst
Attic Cleaning Services in Hurst matter more here than in newer suburbs because of what’s up there: 40 to 60 years of dust, degraded fiberglass, and sometimes critter debris in the older ranch and split-level homes around Precinct Line Road. Before we add new insulation, we want the attic clean. Removing degraded or contaminated material means the new insulation performs to spec instead of mixing with whatever’s already broken down. It also means we can see the top plates and wire penetrations that need air sealing, which is where a lot of Hurst homes lose conditioned air.
What the Job Includes
We vacuum out old fiberglass, bag it, and remove it from the site. Then we inspect the decking, check for moisture issues, and confirm the baffles and vents are doing their job. Finally, we prep the surfaces for the new insulation, whether that’s Knauf blown-in fiberglass, Rockwool batts, or GreenFiber cellulose.
When You Need It
If you have a Hurst home built before 1985 and the attic hasn’t been cleaned or re-insulated in years, assume the old material has settled and lost most of its R-value. If you’ve had rodents or a roof leak, cleaning comes first. We’ll give you an honest read, not a scripted upsell. A full attic clean on a typical Hurst ranch runs $600 to $1,400, and we tell you in advance whether we can salvage any of the existing insulation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We install and service insulation from Knauf, Rockwool, CertainTeed, Icynene, and GreenFiber, plus several other lines. That range matters because a 1967 split-level with a tight, awkward attic pitch doesn’t always take the same product as a 1980s traditional with a straightforward truss layout. We keep material in our Dallas-Fort Worth stock for Hurst customers, so a job rarely waits on a distributor. Neil Barron’s rule is simple: match the product to the attic and the family, and explain why you chose it.
Common Attic Insulation Problems We See in Hurst Homes
- Settled original R-19 batts. Homes built in the 1960s and 1970s around Bellaire Drive and Precinct Line Road usually still have original fiberglass batts, compressed to an effective R-11 or less. That’s why bedrooms over the garage feel like a sauna by 3 p.m.
- Missing air sealing around recessed lights and wire penetrations. Humid attic air gets pulled into the living space, which drives up indoor moisture and AC load during Hurst’s long hot summers. We find this on nearly every pre-1980 attic we open.
- Dark shingle roofs without a radiant barrier. Attic temps climb past 140°F, the insulation bakes, and split-level layouts develop dramatic temperature swings between levels. A radiant barrier often fixes the room-to-room delta faster than adding more insulation alone.
- West-facing walls and vaulted sections under-insulated. Many Hurst ranches have areas where the ceiling follows the roofline, and those sections were never insulated properly. We address those during the same visit, not on a second trip.
Pricing for Attic Insulation in Hurst, TX
A top-up or air-seal-and-blow-in job on a typical Hurst ranch runs $1,200 to $2,800. A full removal, clean, air seal, and R-38+ blow-in usually falls between $1,800 and $4,200 depending on square footage, attic accessibility, and whether we’re adding a radiant barrier. Homes with dark shingles and original R-19 almost always land in the upper half of that range because the air sealing and removal take time when done right. Something on the smaller side, like a one-room top-up over a specific hot spot, can run $600 to $1,200. Call (682) 233-8300 and we’ll put your exact number in writing before we start. Estimates are free, and you will never get a surprise line item after the fact.
We Also Serve Cities Near Hurst
Our crews cover Hurst and the surrounding Mid-Cities area, including Hurst neighbors Haltom City, Fort Worth, Keller, and Kennedale. If you’re just outside the city line, call us and we’ll confirm scheduling for your address. Dispatch is coordinated from our Dallas-Fort Worth office, with local techs who know the older housing stock across the whole area.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Attic Insulation in Hurst
The quickest check is visual: if the insulation looks like flat, yellowish batts sitting below the top of your ceiling joists, it’s likely the original R-19 and it’s lost most of its rated value. In Hurst’s 1960s and 1970s homes, that settled material is often functioning at R-11 or lower, which explains hot bedrooms and uneven room temps. Call (682) 233-8300 and we’ll take a look during a free on-site estimate.
Yes, it makes a measurable difference. A dark shingle roof here can push attic temps past 140°F, and a radiant barrier stapled to the rafters reflects much of that heat back out before it reaches your insulation. Most Hurst homeowners with west-facing rooms see the biggest comfort gain. A radiant barrier install runs $900 to $1,800 on a typical local home, and we’ll include it in your written quote if we think it’s the right call.
Split-level homes have more exterior wall and roofline surface per square foot, and the upper level usually sits directly under an under-insulated attic. Add settled R-19, missing air sealing, and no radiant barrier, and a 10 to 15-degree delta between floors is common. Addressing all three in one visit is the fix we recommend, not one product in isolation.
Often yes, especially in Hurst homes built before 1985. Original R-19 batts have compressed and broken down, and leaving them under new insulation doesn’t restore their R-value. If there’s rodent activity or moisture damage, removal is non-negotiable. Our techs will tell you straight whether the old material can stay or should come out, and why.
Yes, though summer is the bigger driver here. The same air sealing that stops humid attic air from getting pulled into your home during July also stops warm indoor air from escaping during a January freeze. Proper R-38+ insulation works in both directions, and Hurst’s occasional ice events make the air sealing particularly valuable for preventing cold spots. Call (682) 233-8300 for a free estimate, and we’ll walk you through what your specific attic needs.
Written by Neil Barron, Owner at Thistledown Insulation Fort Worth, serving Hurst and surrounding Mid-Cities communities since 2003.